Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Bedienungsanleitung PDF herunterladen (Seite 166)

Application example: Flying saw

State machine

166

Lenze · ApplicationTemplate · 1.3 EN - 04/2013

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

5. Go to the Properties area and enter below the Color Variables of the button the following

value for toggle color:

MM_Vis.scVisuIntern.diFrame=Vis_eFrame.MVis_Infeed;

13.6 State machine

13.6.1 Controlling the state transition in the machine control module

Example: It should be possible to set all lower-level machine modules in the "Ready" or "Manual"

state via two buttons in the visualization of the Machine Control machine control module.

 How to proceed:

1. Declare the elements for the buttons in the MVis_* structure.

Double-click and open:

• A70_MachineModuleSources\ MM_A01_MachineControl\Structs

•Structure MVis_scA01_MachineControl

In the program part, the variables of the BOOL data type for the state change must be

declared, example: xReady and xManual.

2. Insert the buttons into the visualization.

Double-click and open:

• A70_MachineModuleSources\ MM_A01_MachineControl\Visu

•Visualization MVis_A01_MachineControl

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 176 177

Keine Kommentare

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Bedienungsanleitung Seite 166