Lenze Controller-based Automation Bedienungsanleitung PDF herunterladen (Seite 54)

6 Remote maintenance and diagnostics

6.5 File transfer via FTP

Lenze · Controller-based Automation - Visualisation · System Manual · DMS 1.5 EN · 04/2014 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

6.5 File transfer via FTP

The File Transfer Protocol (FTP) is a network protocol for the transfer of data within networks.

• FTP makes it possible to exchange files between the Lenze controller, IPC, or HMI and other PCs.

• The controller, IPC, or HMI data can be accessed via FTP connection.

• FTP requires an existing connection or a remote connection.

• In order to be able to transfer files with Windows® via FTP, the Windows® Explorer can be used

which comes with an integrated FTP support.

 Note!

FTP must be used for system-diagnostic purposes only. Deleting or changing system files

causes malfunctions of the controller!

Controller p300:

• These devices come with a deactivated FTP in the Lenze standard setting.

• The function can be activated via the »WebConfig«. The activation of the function can

influence the real-time behaviour.

• After a restart of the Controller, the function is deactivated again.

 Further information relating to the function and configuration of FTP and web server/

»WebConfig« can be found in the reference manual:

• Controller - Parameter setting & configuration

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 62 63

Keine Kommentare

Lenze Controller-based Automation Bedienungsanleitung Seite 54