Lenze E94AYCPM Bedienungsanleitung PDF herunterladen (Seite 98)

14 Parameter reference

14.2 Parameters of the communication module for slot MXI1

Lenze · E94AYCPM communication module (PROFIBUS®) · Communication Manual · DMS 12.0 EN · 11/2012 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

C13881

C13882

C13885

Parameter | Name:

C13881 | Monitoring time: Data exchange

Data type: UNSIGNED_16

Index: 10694

= 29C6

If the "Data Exchange" state is exited, the response parameterised under C13880/1 is carried out when the

monitoring time for data exchange set here has expired.

• A value of "65535" in this code deactivates the monitoring function.

• A change in monitoring is effective immediately.

• The value set here for the monitoring time must be smaller than the watchdog monitoring time ( C13882/1

Permanent interruption of PROFIBUS communication

( 78)

Setting range (min. value | unit | max. value) Lenze setting

0 ms 65535 65535 ms

; Read access ; Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

Parameter | Name:

C13882 | Monitoring time: Watchdog

Data type: UNSIGNED_32

Index: 10693

= 29C5

Display of the watchdog monitoring time determined by the PROFIBUS master

• A change in the watchdog monitoring time is immediately effective.

• Monitoring starts with the receipt of the first telegram.

• When a value of "0" is displayed, the monitoring function is deactivated.

Permanent interruption of PROFIBUS communication

( 78)

Display area (min. value | unit | max. value)

0 ms 4294967295

Subcodes Info

C13882/1 Watchdog monitoring time

C13882/2 DP-V1 MSC2

; Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

Parameter | Name:

C13885 | Clear process data

Data type: UNSIGNED_8

Index: 10690

= 29C2

Selection of the process data which the controller will process in the event of a PROFIBUS failure in order to maintain

internal communication.

Selection list (Lenze setting printed in bold)

0 Use of most recent master PDOs

1 PDOs are set to the value '0'

; Read access ; Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 124 125

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze E94AYCPM Bedienungsanleitung Seite 98

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Lenze E94AYCPM