Lenze EMF2174IB Bedienungsanleitung PDF herunterladen (Seite 9)

Preliminary works

Coding within the Sub-D plug

EDK2174DB DE/EN/FR 3.0



H2WichtHinw-Codierung_DIP_en

Coding within the Sub-D plug

Via the 9-pin Sub-D socket of the CAN addressing module you can connect a coding plug

which defines baud rate and controller address of the basic controller.

In order to permanently set baud rate and controller address in the Sub-D plug, connect the

pins 1 to 8 to pin 9 in a certain way!

2174CAN004

Coding plug (view of the soldering side)

Setting the baud rate

Baud rate Pin 1 Pin 2 Pin 3

[kbaud]

500 - - -

250 X - -

125 - X -

50 X X -

1000 - - X

”X” = connect to pin 9 ”-” = do not connect

Example:

Setting the baud rate to 50 kbaud

Ö Connect pin 1 to pin 9 and pin 2 to pin 9 by soldering.

Setting the controller address

You can calculate the connectionsbetween the pins 4 to 8 and pin 9 required for setting the

controller address by using the values of the following table:

Pin 4 Pin 5 Pin 6 Pin 7 Pin 8

Value 1 2 4 8 16

Example:

Setting controller address 13

Thesumofthevalueshastoequal13:1+4+8=13

Ö Connect pins 4, 6 and 7 to pin 9 by soldering.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Keine Kommentare

Lenze EMF2174IB Bedienungsanleitung Seite 9