Lenze ECSxK series Bedienungsanleitung PDF herunterladen (Seite 15)

Technical data

General data/operating conditions



EDBCSXKXXX EN 1.0

3 Technical data

3.1 General data/operating conditions

Standards and operating conditions

Conformity CE

Low-Voltage Directive (73/23/EWG)

Approvals

UL 508C Power Conversion Equipment

Underwriter Laboratories (File No. E132659)

for USA and Canada

Vibration resistance Accelerational stability up to 0.7 g (Germanischer Lloyd, general conditions)

Climatic conditions Class 3K3 to EN 50178 (without condensation, relative humidity 30 ... 95 %)

Degree of pollution VDE 0110 part 2 pollution degree 2

Packaging (DIN 4180) Delivery packing

Permissible Transport -25 ... +70 °C

temperature range

Storage

-25 ... +55 °C

Operation 0 ... +55 °C reduce the rated AC current by 2 %/°C above +40°C

Permissible installation height 0 ... 4000 m amsl reduce rated AC current by 5%/1000 m above 1000 m amsl

Installation Installation into control cabinet

Mounting position Vertically suspended

Free space Above/below ≥ 50 mm

To the sides Side-by-side mounting without any clearance

General electrical data

EMC Compliance with EN 61800-3

Noise emission Compliance with limit value class A to EN 55011

(achieved with application-specific collective filter)

Noise immunity Requirements to EN 61800-3

Requirements Standard Severity

ESD

EN 61000-4-2 3, i. e.

8 kV with air discharge

6kVwithcontactdischarge

High frequency in cables EN 61000-4-6 10 V; 0.15 ... 80 MHz

RF interference (enclosure) EN 61000-4-3 3, i. e. 10 V/m;

80 ... 1000 MHz

Burst EN 61000-4-4 3/4, i. e. 2 kV/5 kHz

Surge ( on mains cable) EN 61000-4-5 3, i. e. 1.2/50 µs

1 kV phase-phase

2kVphasePE

Insulation resistance Overvoltage category III to VDE 0110

Discharge current against PE (to EN 50178) > 3.5 mA AC for operation with corresponding controllers

Enclosure

IP20 for standard mounting

IP20 for mounting in cold-plate technique

IP20 for mounting in push-through technique; IP54 on the heatsink side

Protective insulation of control circuits Safe disconnection from supply: Double/reinforced insulation to EN 50178;

Rated insulation voltage 300 V x √2

Noise immunity i n the above-mentioned severities must be guaranteed through the control cabinet! The user must

check the compliance with the severities!

Show/Hide Bookmarks

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze ECSxK series Bedienungsanleitung Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Lenze ECSxK series