Lenze EMF2191IB Bedienungsanleitung PDF herunterladen (Seite 37)

Commissioning

Setting the node address

EDK2191DB DE/EN/FR 2.0



H2_Teilnehmeradresse_einstellen−TN−Adresse

Setting the node address

 Note!

ƒ Use different node addresses for several networked inverters.

The Lenze setting for the node address (node ID) has the value ’4’:

– link switch in position ’0’

– right switch in position ’4’

ƒ Switch the voltage supply of the inverter/communication module off and

on again to activate changed settings.

2191EPL001B

Fig. 2 Setting the node address

Each node has to be assigned to a unique address (node ID).

ƒ Valid address range for slave (controlled node): 1 ... 239

ƒ The corresponding IP address of the communication module results from the setting

of the two rotary switches.

IP address: 192.168.100.<Node ID>

(Value

LeftSwitch

16))(Value

RightSwitch

) + NodeAddress

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 57 58

Keine Kommentare

Lenze EMF2191IB Bedienungsanleitung Seite 37