Lenze GDC with OPC Bedienungsanleitung PDF herunterladen (Seite 7)

Global Drive Control with OPC

General information

 GDCmitOPCEN1.0

3 Searching for OPC drives

Once GDC has been configured as an OPC client, you can search online to find the drives connected

to the OPC bus server:

1. If GDC is still in offline mode, click OptionsWOnline or press function key <F4>to change to

online mode.

2. Select DriveWSearch... or press function key <F2> to open the dialog box Find OPC drives:

3. Click the button Search to start searching or click Cancel to abort.

Tip!

• The drive controllers found on the bus are listed in the window “Drives connected to bus”.

• GDC automatically tries to allocate device descriptions to the drive controllers found.

– If only one drive was found and a device description could be allocated, the device

description is loaded immediately.

– If automatic allocation of the device description for a drive fails, the device description for

the drive can be allocated manually.

Selectthecorrespondingdriveinthewindow“Drives connected to bus” or click Drive

WChoose... in offline mode to open the dialog box for manual allocation.

• Use the command DriveWCommunication parameters... to display the OPC access path

for the active drive in the dialog box Active drive in the text field Access path (e.g.

“COM1.Device_01“).

• For more information about operating GDC, please refer to the “Global Drive Control –

Getting Started” documentation or the GDC Online Help.

Show/Hide Bookmarks

1 2 3 4 5 6 7 8

Keine Kommentare

Lenze GDC with OPC Bedienungsanleitung Seite 7