Lenze MCH Series Bedienungsanleitung PDF herunterladen (Seite 34)

30 13435744_EDBMH01_v13

13.2.3 MCH DISPLAY IN FAULT MODE

When the drive trips on a fault, the display will automatically change to the FAULT

display and the FAULT MESSAGE will be indicated.

DRIVE

STATUS

SPEED

SETPOINT

FAULT > 60.00 HZ

OVERLOAD HAND

FAULT

MESSAGE

HAND/OFF/AUTO

STATUS

SPEED

UNITS

DIRECTION

(FORWARD)

In FAULT mode, the ENTER key will toggle the display between three screens: FAULT,

% LOAD and VAC. The DRIVE STATUS for these displays will be FAULT. Illustrated

herein is an example of the drive in the FAULT mode displaying % LOAD.

DRIVE

STATUS

SPEED

SETPOINT

FAULT > 60.00 HZ

0 % LOAD HAND

FAULT

MESSAGE

HAND/OFF/AUTO

STATUS

SPEED

UNITS

DIRECTION

(FORWARD)

NOTE

To clear a FAULT, press the OFF (STOP) key, issue a remote STOP

command at TB-1 or use TB-13D (refer to Parameter 50 - TB13D

INPUT).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 91 92

Keine Kommentare

Lenze MCH Series Bedienungsanleitung Seite 34