Lenze SV SMV additional I-O module Bedienungsanleitung

SMVector Additional I/O Module Installation and Operation Manual

7 ALSV01BCommissioning4 Commissioning4.1 Network Parameters (P400)Code Possible SettingsIMPORTANTNo. Name Default Selectionp400Network Protocol 0

ALSV01B 8Commissioning4.2 Additional I/O Module ParametersIn addition to the parameters detailed in the SMVector Frequency Inverter Operating Instru

9 ALSV01BCommissioningCode Possible SettingsIMPORTANTNo. Name Default Selectionp441Relay Output TB-19, 20, 210 0 None Disables the output1 Run En

ALSV01B 10Commissioning4.3 DisplayParameter P530 allows monitoring of the control terminal points and common drive conditions.An illuminated LED seg

Lenze AC Tech Corporation630 Douglas Street • Uxbridge MA 01569 • USASales: 800-217-9100 •Service: 508-278-9100www.lenzeamericas.comSMVector Additiona

This documentation applies to the optional Additional I/O module for the SMVector inverter and should be used in conjunction with the SMVector Op

i ALSV01BContents1 Safety Information ...

1 ALSV01BSafety Information1 Safety Information1.1 Warnings, Cautions and Notes1.1.1 GeneralSome parts of Lenze controllers (frequency inverters

ALSV01B 2Safety Information1.1.4 Electrical ConnectionWhen working on live drive controllers, applicable national regulations for the prevention of

3 ALSV01BIntroduction2 IntroductionThis manual provides installation and operational data specific to the Additional I/O Module for the SMVector se

ALSV01B 4Installation3 Installation3.1 Mechanical Installation1. Ensure that for safety reasons the AC supply has been disconnected bef

5 ALSV01BInstallationFigure 3: Re-Installing the Terminal Cover3.2 Module Terminal BlockTable 2 identifies the terminals and describes the function

ALSV01B 6Installation3.3 Electrical Installation3.3.1 Terminal DescriptionTable 3 contains each terminal's electrical specification and any par