Lenze PC-based automation Bedienungsanleitung PDF herunterladen (Seite 41)

DMS 1.3 EN - 02/2011 L 41

Control technology| System manual

Commissioning of the system

General commissioning steps

5 Commissioning of the system

5.1 General commissioning steps

This chapter informs you about the basic steps to commission a control system. The over-

view in table form shows the order of commissioning steps.

 Detailed information about the single commissioning steps...

• ... with CANopen can be found in the "CANopen control technology" commu-

nication manual.

• ... with EtherCAT can be found in the "EtherCAT control technology"

communication manual.

Commissioning step Description Engineering tools

Commissioning of the Industrial PC. • Establishing the general readiness

for operation of the IPC.

• The general readiness for operati-

on enables the usability of the

gateway in the IPC so that the

communication with field devices

is possible via the integrated gate-

way.

Industrial PC as gateway

( 23)

Optional »Engineer« or

»WebConfig«

Planning/installation of the network

(as for example electrical wiring, set-

ting of DIP switches)

• This serves to prepare the field de-

vices for communication with the

IPC and the engineering tool

which communicates via the

gateway of the IPC.

None

Project planning and commissioning

of the field devices

• Using the gateway in the IPC, the

"Engineer" and "GDC" programs

can communicate with the corres-

ponding field devices and carry

out the required parameter set-

ting steps.

»Engineer«

»GDC«

Project planning of the control • Creating:

–the control configuration,

– bus configuration,

–control program

»PLC Designer«

»EtherCAT Configurator«

Creating a visualisation • If the IPC is provided with a moni-

tor, a visualisation can take place

there in parallel to the control.

• To create the visualisation and to

download it to the IPC, use the

program

»VisiWinNET®«

Integrated visualisation

( 21)

»VisiWinNET®«

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze PC-based automation Bedienungsanleitung Seite 41

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze PC-based automation