Lenze 2003 Setpoint integrator Bedienungsanleitung PDF herunterladen (Seite 23)



Connection:

• Connect the setpoint potentiometer (10 kΩ

lin.

) to the terminals

42, 43, 44 or the selected master-voltage to the terminals 43(+)

and 44(-) of the 2003 board.

• Connect terminal 41 to terminal 8 of the 470 / 480 controller.

• When using the setpoint potentiometer provided, the mechanical

screw joint must be provided with an additional PE connection

and the connections must be insulated or covered.

• Set the trimmer "V

master - coarse

" to the right stop.

• Reinstall the protection cover. (Use the original plastic cover for

470 controllers!

3.2 Terminal-connection diagram

The terminal-connection diagram shows the wiring between the

2003 option board with setpoint potentiometer and the 470 / 480

controller.

Setpoint potentiometer

10 K lin

470 / 480

2003

7 8 9 41 42 43 44

Remove the setpoint-potentiometer connection from the terminals

7, 8, 9 of the basic instrument and connect them to the 2003 option

board!

1 2 ... 18 19 20 21 22 23 24 25 26

O Matetakufa 26 Mar 2024 | 14:24:05

Very important site.

Lenze 2003 Setpoint integrator Bedienungsanleitung Seite 23