Lenze DDS Function library MemDrv Bedienungsanleitung PDF herunterladen (Seite 26)

4.10 L_MemWriteINT

Function library LenzeMemDrv.lib

Functions for RAM memory access

4−12

LenzeMemDrv.lib EN 1.1

4.10 L_MemWriteINT

INT. L_MemWriteINT(nData, byRamBlockNr, wOffset)

This function can be used to write the value of a variable of type "integer" into a RAM block of the

PLC.

wOffset

Block 1 (64KByte)

Block 2 (64 KByte)

RAM

byRamBlockNr

Block n (64 KByte)

Integer

(16 Bit)

nData

Transfer parameters

Identifiers Data type Info/possible settings

nData Integer Data value to be written (16 bits).

byRamBlockNr Byte Selecting the RAM memory block into which nData is to be written.

1 RAM memory 1, size: 64 kbytes

2 RAM memory 2, size: 64 kbytes

wOffset Word Destination address in the selected RAM memory block to which nData is to be written.

0 ... 65534 Destination address (offset)

· Only even values are permissible as offset!

Return value: Integer

Value Meaning

0 Write request completed.

−60 Write request has not been transferred to the operating system since the transfer parameters are faulty:

byRamBlockNr is invalid.

−35 Copy job has not been transferred to the operating system since the transfer parameters are faulty:

wOffset is an odd address or a value beyond the permissible range (0 ... 65534).

−50 Copy job has not been transferred to the operating system since the memory is presently accessed

(e. g. via codes).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Keine Kommentare

Lenze DDS Function library MemDrv Bedienungsanleitung Seite 26