Lenze E84AYCET EtherCAT MCI module Bedienungsanleitung PDF herunterladen (Seite 93)

Lenze · E84AYCET communication module (EtherCAT) · Communication Manual · DMS 5.0 EN · 05/2013 · TD17 93

12 Error messages

12.2 Possible causes and remedies

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

12.2 Possible causes and remedies

This chapter lists all EtherCAT error messages in the numerical order of the error numbers. Possible

causes and remedies as well as responses to the error messages are described in detail.

Lost connection to 8400 [0x01bc3100]

Memory: No access [0x01bc5531]

Memory: Read error [0x01bc5532]

Memory: Write error [0x01bc5533]

Restart by watchdog reset [0x01bc6010]

Response (Lenze setting printed in bold) Setting: not possible

 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning : Information

Cause Remedy

MCI communication for the Inverter Drives 8400 is

interrupted.

• Inverter Drive 8400 is switched off.

• The communication module has not been inserted

properly into the slot of the Inverter Drives 8400.

• Switch on Inverter Drive 8400.

• Check screwed connection of the communication

module to the MC slot of the Inverter Drive 8400.

• Send communication module and Inverter Drive 8400

with error description to Lenze.

Response (Lenze setting printed in bold) Setting: not possible

 None  System fault : Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information

Cause Remedy

Access via standard device to parameter set within the

memory module was not successful.

Repeat download of the application (including module).

Response (Lenze setting printed in bold) Setting: not possible

 None  System fault : Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information

Cause Remedy

Parameters of the memory module could not be read. Repeat download of the application (including module).

Response (Lenze setting printed in bold) Setting: not possible

 None  System fault : Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information

Cause Remedy

Parameters of the memory module could not be written. Repeat download of the application (including module).

Response (Lenze setting printed in bold) Setting: not possible

 None  System fault : Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information

Cause Remedy

Communication module is defective. Send communication module with error description to

Lenze.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 108 109

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze E84AYCET EtherCAT MCI module Bedienungsanleitung Seite 93

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Lenze E84AYCET EtherCAT MCI module