Lenze E94AYCEP Bedienungsanleitung PDF herunterladen (Seite 39)

Electrical installation

Ethernet POWERLINK connection

EDK94AYCEP DE/EN/FR/ES/IT 4.0



H2_EthernetAnschluss−Ethernet_KabelSpezifikation

Ethernet POWERLINK connection

You can use a standard Ethernet patch cable for connection to the communication module

(see "Ethernet cable specifications" (41)).

Mounting and dismounting of the Ethernet cables has been optimised for the use of

connectors according to the "Automation Initiative of German Domestic Automobile

Manufacturers" (AIDA).

 Note!

Plug/remove the Ethernet cable plug vertically into/from the socket to make

sure that the RJ45 socket will not be damaged.

ƒ The Ethernet POWERLINK connection is made via RJ45 sockets X211 and X212.

ƒ Do not wire, if possible, more than 10 nodes in succession in a network line.

ƒ In case of more than 10 nodes you should deactivate the automatic calculation of the

hub level in the »Engineer« and enter it manually to increase the performance.

ƒ At a cycle time of 1 ms, approx. 25 mandatory nodes can be operated.

– The number of nodes can be increased if the EPL cycle time is increased as well.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 109 110

Keine Kommentare

Lenze E94AYCEP Bedienungsanleitung Seite 39