Lenze E94AZMS0314 Bedienungsanleitung PDF herunterladen (Seite 46)

Mechanical installation

Side−by−side mounting − device size I

EDK94AZMS DE/EN/FR/ES/IT 8.0

H1_MechINS−Fi NbMontage_GG2−3_EN

Screws Tightening torque

E94AZxS0044

2 x M5x20

3.4 Nm (30 lb−in)

E94AZxS0104

E94AZxS0294 2 x M5x25

3. Under limited space conditions, filter and mounting base can be connected

electrically. (^ 49)

4. Screw the filter onto the mounting plate.

– Use M5 screw and washer assemblies or M5 hexagon socket screws with washers.

– If further devices are to be mounted directly adjacent on the right−hand side of the

filter, do not tighten the screws fully before all devices are mounted and aligned.

– Tightening torque: 3.4 Nm (30 lb−in).

I Tip!

Under limited space conditions, filter and mounting base can be connected

electrically when step 2 has been carried out.

Side−by−side mounting − device size I

Mounting steps

How to proceed for side−by−side mounting:

1. Prepare M5 threaded holes on the mounting plate, for instance according to the

mounting grid.

– Always use all mounting points specified.

2. Mount the filter on the prepared mounting plate to the left of the mounting base.

– Use M5 screw and washer assemblies or M5 hexagon socket screws with washers.

– If further devices are to be mounted directly adjacent on the right−hand side of the

filter, do not tighten the screws fully before all devices are mounted and aligned.

– Tightening torque: 3.4 Nm (30 lb−in).

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 131 132

Keine Kommentare

Lenze E94AZMS0314 Bedienungsanleitung Seite 46