Lenze E94AZMS0314 Bedienungsanleitung PDF herunterladen (Seite 48)

Mechanical installation

Side−by−side mounting − device sizes II and III

EDK94AZMS DE/EN/FR/ES/IT 8.0

H1_MechINS−Fi NbMontage_GG2−3_EN

Mounting steps

SSP94NF006

How to proceed for side−by−side mounting:

1. Hook the angle bracket 0 into the grid hole pattern of the filter 1.

2. Mount the filter on the prepared mounting plate to the left of the mounting base.

– Filter turned by 90° compared to standard mounting.

– The mounting holes do not match the typical 9400 grid hole pattern.

– Always use all mounting points specified.

– Use M5 screw and washer assemblies or M5 hexagon socket screws with washers.

– If further devices are to be mounted directly adjacent on the right−hand side of the

filter, do not tighten the screws fully before all devices are mounted and aligned.

– Tightening torque: 3.4 Nm (30 lb−in).

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 131 132

Keine Kommentare

Lenze E94AZMS0314 Bedienungsanleitung Seite 48