Lenze EMF2113IB Bedienungsanleitung PDF herunterladen (Seite 49)

Electrical installation

DC voltage supply

EDKMF2113 DE/EN/FR 5.1



H1_E_INST−Merker_subdbuchsleiste

DC voltage supply

External voltage supply

If required, feed the communication module with a separate supply voltage via the

two−pole plug connector.

Use a separate supply unit in every control cabinet if the distance between the control

cabinets is larger than normal.

Plug connector Explanation

"+" U = 24VDC (21.6 V − 0% ... 26.4 V + 0 %)

I = 120 mA

"−" Reference potential for external voltage supply

Controller External voltage supply

820X Always required

821X / 822X / 824X /

93XX / 9300 Servo

PLC / Drive PLC /

ECSxS / ECSxP /

ECSxA

Only required if the mains supplying the corresponding controller is to be

switched off but communication must not be interrupted.

For these basic devices the internal voltage supply can be used.

8200 vector See notes given in "Internal voltage supply" 51

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 111 112

Keine Kommentare

Lenze EMF2113IB Bedienungsanleitung Seite 49