Lenze EMF2113IB Bedienungsanleitung PDF herunterladen (Seite 61)

Commissioning

Possible settings via the front DIP switches

EDKMF2113 DE/EN/FR 5.1



H1inbet−Merker_hidden statusanzeige

Possible settings via the front DIP switches

 Note!

If switches S1 ... S8 remain in the Lenze setting OFF, the configurations set

under the codes C1910, C1911 and C1912 will become active when the device

is switched on.

If one or several switches of switches S1 ... S7 are switched over to ON,

ƒ all switch positions are valid!

ƒ the following must be set:

– Number of process data words (PCD),

– Number of parameter data words (PCP), and

– Device control AIF−CTRL / DRIVECOM control

Switch off the voltage supply of the communication module and afterwards on again to

activate changed settings.

As a maximum, the data word sum (PCD + PCP) is to amount to 10 words.

Please note that only the switch combinations listed in the following tables represent

defined states. If the settings are unacceptable, the yellow LED at the front of the

communication module will start blinking with f = 8Hz.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 111 112

Keine Kommentare

Lenze EMF2113IB Bedienungsanleitung Seite 61