Lenze EVS9332xP Bedienungsanleitung PDF herunterladen (Seite 310)

Function library

Function blocks

3.5.69 Variable table − speed (VTVEL)

3−282

EDSVS9332P−EXT DE 2.0

Function

A total of 34 table positions is available.

l Enter fixed setpoints under C1302.

– 30 table positions (VTVEL−No1 ... VTVEL−No30) are available.

– Subcodes (C1302/1 ... C1302/30) define the table position number.

l Enter variable setpoints under VTVEL−INx.

– Four table positions (VTVEL−No31 ... VTVEL−No34) are available.

– Signal input via function blocks.

– The setpoints must be transmitted to the table positions before the program set starts and

has access to it.

l C1382 indicates the setpoints (in % of vmax) on the table positions.

– Select table position (C1382/1 ... C1382/34) with subcode.

l C1383 displays the setpoints (in inc) on the table positions.

– Select table position (C1383/1 ... C1383/34) with subcode.

l The conversion from v [units/s] to v [inc] is performed according to the formula:

v[inc] + v[unitsńs] @

65536[incńr] @ gearnominator @ 16384

Feedconst.[unitsńr] @ geardenominator @ 1000[1ńs]

Tip!

Entries into the processing table are only required if FB inputs and outputs are used.

1 2 ... 305 306 307 308 309 310 311 312 313 314 315 ... 333 334

Keine Kommentare

Lenze EVS9332xP Bedienungsanleitung Seite 310