
Mechanical installation
Important notes
4
EN
9
Lenze ¯ MA 12.0015 ¯ 1.0
4 Mechanical installation
4.1 Important notes
¯ Use load carrying equipment for transport!
¯ Before the transport
– check that all components are safely mounted,
– fasten all transport aids (eye bolts or support plates).
¯ Transport the drive only with means of transport or hoists with a sufficient load
capacity.
¯ Ensure secure fastening.
¯ Prevent shocks!
Danger!
Danger due to toppling or falling loads!
¯ The payload of the hoists and load handling devices must at least
correspond to the weight of the load.
¯ The load must be secured in such a way that it cannot topple or fall
down.
¯ Do not stay under a pending load!
4.2 Means of transport for gearboxes
Danger!
The motors attached to the gearbox are partially equipped with eyebolts.
These are exclusively determined for mounting/dismounting the motor
to the gearbox and must not be used for the complete geared motor!
Stop!
Observe load carrying capacity!
Staying under floating load is prohibited!
Kommentare zu diesen Handbüchern