Lenze PLC Designer PLC Designer (R3-1) Bedienungsanleitung PDF herunterladen (Seite 47)

L-force | PLC Designer

Lenze Specific Functions

 DMS 4.1 EN 03/2011 TD29 45

In addition to the position, speed and acceleration process values, this AxisRef block

also provides the raw data of the counter or SSI-I/O module (i.e. the "timer tick" for the

read position and the absolute position).

The position of AxisRef is compensated so that it refers to the "timer 0 interrupt" of the

control, i.e. the "timer 0 interrupt" is the reference point.

The "L_SMC_FreeEncoder device" also includes a special tab that is similar to the tab of

the SM_Drive_Logical. This tab can be used to set whether a linear or a rotary

measuring system is to be used and to select the filtering of position and speed.

Abb. 2 Figure: Tab for L_SM_FreeEncoder

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 116 117

Keine Kommentare

Lenze PLC Designer PLC Designer (R3-1) Bedienungsanleitung Seite 47