Lenze PROFINET Controller-based Automation Bedienungsanleitung PDF herunterladen (Seite 28)

6 Commissioning of the PROFINET

6.2 The commissioning steps in detail

Lenze · Controller-based Automation · PROFINET® Communication Manual · DMS 1.2 EN · 04/2014 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

6.2.8 Creating a control configuration (adding field devices)

 How to create the control configuration in the »PLC Designer«:

1. Go to the context menu of the target system (device, Lenze Controller ...) and use the

Add device command to extend the control configuration by the PROFINET I/O

device.

 Note!

The PROFINET Lenze Controller is exclusively configured using the »PLC Designer«.

Other Lenze field devices receive their PROFINET configuration from the higher-level

control (e.g. via the »STEP7« project of a Siemens SIMATIC S7 PLC).

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

Keine Kommentare

Lenze PROFINET Controller-based Automation Bedienungsanleitung Seite 28