Lenze PROFINET Controller-based Automation Bedienungsanleitung PDF herunterladen (Seite 35)

Lenze · Controller-based Automation · PROFINET® Communication Manual · DMS 1.2 EN · 04/2014 · TD17 35

8 Defining the cycle time of the PLC project

8.2 Optimising the system

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

8.2 Optimising the system

 How to optimise the system:

1. Use the menu command Online  Login, or log in on the Lenze controller with <Alt>+<F8>.

With the log-in, the I/O device configuration is loaded into the controller.

2. Check the task processing times.

3. Optimising the cycle times:

• If technologically required, the cycle times of the remaining tasks with lower priorities

can be decreased.

• Condition: No task with a low priority must assign more than 60 percent of the

corresponding cycle time in its task utilisation.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

Keine Kommentare

Lenze PROFINET Controller-based Automation Bedienungsanleitung Seite 35