Lenze E94AMHE Bedienungsanleitung PDF herunterladen (Seite 73)

Wiring the device modules

Communication modules



EDK94AMH24 DE/EN/FR/ES/IT 3.1

DIP switch

Pos. Description

A Addressing of the station

For addressing purposes, every station must be given an unambiguous address.

Valid address range: 1 … 126

The address can be set freely via the front−panel switch.

 Note!

ƒ For S1 − S7 = OFF (Lenze setting):

When switching on the module, the configuration set under code C00899

becomes active.

ƒ For one of the switches S1 − S7 = ON:

When switching on the module, the address resulting from the switch

setting becomes active.

Switch off the voltage supply of the communication module and then on again

in order to activate changed settings.

Address settings through the DIP switch (device front)

The sum of the values (identical with package labelling) results in the station address to be

set:

Example:

Switch S7 S6 S5 S4 S3 S2 S1

Package labelling «64» «32» «16» «8» «4» «2» «1»

Switch state 0 0 1 0 1 1 1

Address (= 23) 0 0 16 0 4 2 1

Displays

LED

Description

Pos. Colour Condition

MS Green

On The communication module is supplied with voltage and connected to

the standard device.

Blinking The communication module is supplied with voltage, but has no

connection to the standard device. (The standard device is switched off,

initialising, or not present.)

ME Red On An error in the communication module has occurred.

BS Green Blinking Communication via the communication module has been established.

PROFIBUS communication is active.

BE Red On Bus monitoring has been triggered.

DE Red On The communication module is not accepted by the standard device. (See

notes in the documentation for the standard device.)

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 213 214

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze E94AMHE Bedienungsanleitung Seite 73

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Lenze E94AMHE