Lenze SS208AC Bedienungsanleitung PDF herunterladen (Seite 17)

SimpleServo 100/200 User Manual Rev 3.4

DS2 (Serial Communications Port input to Servo)

DS2 is a 9-pin DB connector that is used to communicate with a host computer. All levels must be RS-

232C compliant.

Table 6. TB505 Pin Assignments

"D"-Sub Pin # Name Function

1 Reserved

2 TX RS232 TX

3 RX RS232 RX

4 Reserved

5 GND Common

6 Reserved

7 Reserved

8 Reserved

9 Reserved

WARNING!

Do not make any connection to Reserved pins!

Note:

If you purchase serial cables from a third party, you must use pass-through cable, not

Null-Modem (not crossover).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 30 31

Keine Kommentare

Lenze SS208AC Bedienungsanleitung Seite 17