Lenze E94AYCPM Bedienungsanleitung PDF herunterladen (Seite 43)

Electrical installation

External voltage supply

EDK94AYCPM DE/EN/FR/ES/IT 6.0



H1_E_INST−Steckerleiste_Schraubanschl_15

External voltage supply

 Note!

Always use a separate power supply unit in every control cabinet and safely

separate it according to EN 61800−5−1 ("SELV"/"PELV") in the case of external

voltage supply and larger distances between the control cabinets.

ƒ The external voltage supply of the communication module is required if

communication is to continue when the power supply of the standard device fails.

ƒ Access to parameters of a standard device disconnected from the mains is not

possible.

ƒ The external voltage supply is effected via the 2−pole plug connector.

Assignment of the 2−pole plug connector (X200)

Designation Description

+ U = 24VDC(20.4 V − 0%... 28.8 V+ 0%)

I = 130 mA

− Reference potential for external voltage supply

Terminal data

Area Values

Electrical connection Plug connector with screw connection

Possible connections

rigid:

1.5 mm

(AWG 16)

flexible:

without wire end ferrule

1.5 mm

(AWG 16)

with wire end ferrule, without plastic sleeve

1.5 mm

(AWG 16)

with wire end ferrule, with plastic sleeve

1.5 mm

(AWG 16)

Tightening torque 0.5 ... 0.6 Nm (4.4 ... 5.3 lb−in)

Stripping length 6 mm

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 113 114

Keine Kommentare

Lenze E94AYCPM Bedienungsanleitung Seite 43