Lenze CANopen Controller-based Automation Bedienungsanleitung PDF herunterladen (Seite 101)

14 Diagnostics

14.5 »PCAN view« for diagnostic purposes

101

Lenze · Controller-based Automation · CANopen® Communication Manual · DMS 6.3 EN · 04/2014 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

14.5 »PCAN view« for diagnostic purposes

This chapter describes how to use the »PCAN view« program for diagnostics of your CANopen

network.

»PCAN view« is the basic version of the »PCAN explorer« program of PEAK System Technik GmbH.

The program allows for simultaneous transmission and reception of CAN messages which can be

sent manually and periodically. Errors on the bus system and memory overflows of the controlled

CAN hardware are displayed.

14.5.1 Monitor telegram traffic on the CANopen bus

 How to monitor the telegram communication:

1. Directly connect the Engineering PC to the CANopen bus via the EMF2177IB USB system

bus adapter.

2. Start the »PCAN view« program.

3. Connect »PCAN view« to the USB system bus adapter with the desired baud rate via the

"Connect to CAN Hardware" tab.

Example:

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 109 110

Keine Kommentare

Lenze CANopen Controller-based Automation Bedienungsanleitung Seite 101