Lenze CANopen Controller-based Automation Bedienungsanleitung PDF herunterladen (Seite 46)

Lenze · Controller-based Automation · CANopen® Communication Manual · DMS 6.3 EN · 04/2014 · TD17 46

8 Commissioning of the CANopen Logic bus

8.8 Creating a control configuration (adding field devices)

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2. Use the CANbus tab to set the baud rate.

3. Use the Add Device to add the "CANopen Manager MC-CAN2" to the control

configuration.

 Note!

The baud rate set in the »PLC Designer« overwrites the baud rate set for the field devices

via »Engineer« or »EASY Starter«.

Always set the same baud rate for all nodes in a CANopen network.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 109 110

Keine Kommentare

Lenze CANopen Controller-based Automation Bedienungsanleitung Seite 46