Lenze PROFIBUS Controller-based Automation Bedienungsanleitung PDF herunterladen (Seite 30)

6 Commissioning of PROFIBUS

6.2 Detailed commissioning steps

Lenze · Controller-based Automation · PROFIBUS® Communication Manual · DMS 4.3 EN · 04/2014 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

6.2.6 Configuring the communication parameters

Set the communication parameters to establish an online connection to the Lenze Controller later

on.

 How to configure the communication parameters

1. Go to the Communication settings tab of the target system (device, Lenze Controller ...) and

click the Add gateway button.

Then go to the Gateway dialog box and enter the IP address of the controller. (By

double-clicking the predefined value it can be overwritten.)

2. Confirm the entry by clicking OK.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 54 55

Keine Kommentare

Lenze PROFIBUS Controller-based Automation Bedienungsanleitung Seite 30