Lenze ApplicationTemplate PackML (PLC Designer R3-x) Bedienungsanleitung PDF herunterladen (Seite 79)

Lenze · ApplicationTemplate PackML · 1.0 EN - 05/2014 79

Architecture: The ApplicationTemplate PackML in detail

Central management of alarms

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

In order to couple the Modul_1 slave module to the master again, first the reason for the alarm has

to be removed.

• By means of a procedure, both state machines of master and slave module have to be

synchronised.

• The deactivated slave module has to be coupled again to the state machine of the master

module using the Command_DisableModule method. Renewed coupling of machine

modules ( 72)

9.10 Central management of alarms

The alarm handling transmits all alarms that occur in the machine modules to the global Alarm List.

• The state machine of the Modul_1 slave

module is decoupled automatically from the

master module. "Module Disabled" is

highlighted in red.

• The state machine changes to the

"ABORTING" state.

•The Machine Control master module remains

unchanged in the "EXECUTE" state.

• The machine modules forward the

messages to the Alarm List Handler.

• All current alarms are visible in the

global Alarm List.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 98 99

Keine Kommentare

Lenze ApplicationTemplate PackML (PLC Designer R3-x) Bedienungsanleitung Seite 79