Lenze ApplicationTemplate PackML (PLC Designer R3-x) Bedienungsanleitung PDF herunterladen (Seite 93)

Lenze · ApplicationTemplate PackML · 1.0 EN - 05/2014 93

An overview of the methods

An overview of the command methods: Command_xxx

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Command_CtrlCmd

Changeover of the prevailing transitions of

the PackML state machine.

Inputs

eCtrlCmd

L_EATP_CtrlCmds_PackML

Desired status to be set of the

machine module requested.

xCmdChangeRequest

BOOL

TRUE: Request desired status.

Command_DisableModule

Activates/deactivates the decoupling of a

slave machine module from the master.

Inputs

MM_Address

L_EATP_MM_Address

ID of the module the status of which

is to be requested. The value "0" and

L_EATP_CONST.OWNID address the

module's own ID.

xValue

BOOL

• TRUE: Activate decoupling.

• FALSE: Deactivate decoupling:

The machine module is coupled to

the master module.

Command_SendAlarmReactionIfDisabled

Activates/deactivates the transfer of alarm

reaction types to the master module even if

the module is deactivated (DisableModule).

Inputs

MM_Address

L_EATP_MM_Address

ID of the module the status of which

is to be requested. The value "0" and

L_EATP_CONST.OWNID address the

module's own ID.

xSend... Activates/deactivates the transfer of

an alarm reaction type:

TRUE: Activate the transfer of the

type/

FALSE: Deactivate the transfer of the

type.

•...SystemFault

•...Abort

•...Stop

•...Fault

BOOL

• Reaction type "System fault"

• Reaction type "Abort"

• Reaction type "Stop"

• Reaction type "Fault"

Command_UnitMode

Changeover of the modes from the states

that are defined in the PackMLConfig

program. Predefined operating modes in

ModApp1 ( 20)

Inputs

eUnitMode

L_EATP_Modes_PackML

Mode to be set.

xUnitModeRequest

BOOL

TRUE: Request desired mode.

Identifier/function Transfer value/data type Description

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 99

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze ApplicationTemplate PackML (PLC Designer R3-x) Bedienungsanleitung Seite 93

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze ApplicationTemplate PackML (PLC Designer R3-x)