Lenze HMI Designer Getting Started Bedienungsanleitung PDF herunterladen (Seite 47)

HMI Designer

EDBHMI-DEEN DE/EN 4.0

pÉäÉÅí ä~åÖì~ÖÉ

The text can be displayed in German or English language.

• The language can only be selected on the first page (start page).



shift

Esc

F3 F4 F5

Help

Info

F1 => PARAMETER

F2 => CONTROL INVERTER

German

• Press <shift> + <F3>.

English

• Press <shift> + <F4>.

båíÉê é~ê~ãÉíÉêë



shift

Esc

F3 F4 F5

Help

Info

F1 => PARAMETER

F2 => CONTROL INVERTER

Acceleration time, deceleration time, Nmax

• Press <shift> + <F1>.



shift

Esc

F3 F4 F5

Help

Info

ACC. TIME :00000s

DEC. TIME :00000s

Acceleration time, deceleration time

1. Press <Left arrow> or <Right arrow> to go to

line “Acceleration time”.

2. Press <Select parameter> to enter a value.

3. Enter the desired value using <Up arrow> and

<Down arrow>.

4. Confirm with <Confirm input>.

Repeat steps 1 to 4 to set a value under

“Deceleration time”.



shift

Esc

F3 F4 F5

Help

Info

Nmax:3000 rpm

<F3

Nmax

1. Press <Down arrow> to go to the next page.

2. Press <Select parameter> to enter a value for

Nmax.

3. Enter the desired value using <Up arrow> and

<Down arrow>.

4. Confirm with <Confirm input>.

5. Press <shift> + <F3> to return to the first page

(start page).

1 2 ... 42 43 44 45 46 47 48 49 50

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze HMI Designer Getting Started Bedienungsanleitung Seite 47

Kommentare zu diesen Handbüchern