Lenze I/O system 1000 Bedienungsanleitung PDF herunterladen (Seite 18)

4 Mapping the real station structure in the »PLC Designer«

4.2 Configuring the I/O modules at the backplane bus of the L-force Controller

Lenze · I/O system 1000 · commissioning guidelines for the PLC Designer · DMS 1.2 EN · 11/2012 · TD05

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

4. Add all other available I/O compound modules of the device view in the same way.

• Exemplary representation:

5. Click Close to close the Add device dialog box again.

 Tip!

• With a correct configuration and after going online and starting the PLC, all modules in

the device view are marked with the symbol.

• In the event of an error, i.e. if the configuration deviates from the physical arrangement,

the corresponding modules are marked with the symbol.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Keine Kommentare

Lenze I/O system 1000 Bedienungsanleitung Seite 18