Lenze I/O system 1000 Bedienungsanleitung PDF herunterladen (Seite 20)

4 Mapping the real station structure in the »PLC Designer«

4.3 Configuring I/O modules on the EtherCAT bus coupler module

Lenze · I/O system 1000 · commissioning guidelines for the PLC Designer · DMS 1.2 EN · 11/2012 · TD05

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

3. Click Add device to add the selected device to the L-force Controller.

•The Add device dialog box remains open.

Adding the EtherCAT bus coupler module (slave) to the EtherCAT master

4. Select the "EtherCAT_Master" device in the device view:

5. Now select the "EPM-S130" device (EtherCAT bus coupler module) in the still opened Add

device dialog box.

6. Click Add device to add the selected device to the EtherCAT master.

•The Add device dialog box remains open.

Adding I/O compound modules to the EtherCAT bus coupler module

7. Select the "EPM_S130" device in the device view:

8. Select the physically first I/O compound module in the still opened Add device dialog box

and add it by clicking Add device in the device view.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Keine Kommentare

Lenze I/O system 1000 Bedienungsanleitung Seite 20