Lenze PLC Designer PLC Designer (R2-x) Bedienungsanleitung PDF herunterladen (Seite 514)

L-force | PLC Designer

Operands in PLC Designer

512 DMS 3.2 EN 02/2011 TD29 

Declaration in POU:

x.enable:=true;

This will set TRUE the 42. bit in variable x. Since bvar has 8 bits and rvar has 32 bits,

the bitaccess will be done on the second bit of variable wvar, which as a result will get

If a variable, which does a bitaccess on a structure variable with the aid of a global

constant, should be displayed correctly in the input assistant, at monitoring in the

declaration window and in the intellisense function. please use pragma {bitaccess}

which is shown in the example. Then in addition you get displayed the global

constant beyond the respective structure variable during monitoring in the

declaration window:

Keine Kommentare

Lenze PLC Designer PLC Designer (R2-x) Bedienungsanleitung Seite 514