Lenze PLC Designer PLC Designer (R2-x) Bedienungsanleitung PDF herunterladen (Seite 690)

100

101

L-force | PLC Designer

PLC Designer Visualization

688 DMS 3.2 EN 02/2011 TD29 

20.4 Positioning of Visualization Elements...

20.4.1 Selecting Visualization Elements

The selection mode is activated by default. In order to select an element, click with the

mouse on the element. You can also select the first element of the elements list by

pressing the <Tab> key and jump to the next by each further keystroke. If you press

the <Tab> key while pressing the <Shift> key, you jump backwards in the order of the

elements list.

In order to select elements, which are placed one upon the other, first select the top

level element by a mouse-click. Then do further mouse-clicks while the

<Ctrl>+<Shift>-buttons are pressed, to reach the elements in the underlying levels .

In order to mark multiple elements, press and hold the <Shift> key and click the

corresponding elements, one after another; or, while holding down the left mouse

button, pull a window over the elements to be selected.

In order to select all the elements, use the 'Extras' 'Select All' command.

If you are in the element list (called by 'Extras' 'Element list'), you can select the

concerned element in the visualization by selecting a line.

20.4.2 Changing the Selection and Insert Mode

After the insertion of a visualization element, there is an automatic change back into

the selection mode. If you want to insert an additional element the same way, you can

once again select the corresponding command in the menu or the symbol

in the

tool bar.

You can also quickly change between the selection mode and the insert mode by

pressing the <Ctrl>-key and the right mouse button simultaneously.

In the insert mode, the corresponding symbol will also appear at the mouse pointer,

and the name will also be indicated in black in the status bar.

20.4.3 'Extras' 'Select'

This command is used to switch the selection mode on or off. This can also be

achieved using the symbol

or by pressing the right mouse-key while holding

down the key at the same time.

20.4.4 'Extras' 'Select All'

This command allows you to select all visualization elements within the current

visualization object.

1 2 ... 685 686 687 688 689 690 691 692 693 694 695 ... 843 844

Lenze PLC Designer PLC Designer (R2-x) Bedienungsanleitung Seite 690

Kommentare zu diesen Handbüchern

Lenze PLC Designer PLC Designer (R2-x) Bedienungsanleitung Seite 690

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze PLC Designer PLC Designer (R2-x)