Lenze PLC Designer PLC Designer (R2-x) Bedienungsanleitung PDF herunterladen (Seite 589)

100

101

L-force | PLC Designer

Compiler Errors and Warnings

 DMS 3.2 EN 02/2011 TD29 587

3453

"The channel '<name>' couldn't be created!"

The device file for channel <name> does not fit to the current configuration.

Eventually it has been modified since the configuration has been set up in »PLC

Designer« or it is corrupted.

3454

"The address '<name>' points to an used memory!"

Option 'Check for overlapping addresses' is activated in the dialog ‚Settings’ of the PLC

configuration and an overlap has been detected. Regard, that the area check is based

on the size which results of the data types of the modules, not on the size which is

given by the entry ‚size’ in the configuration file.

3455

"Error during load: GSD-File '<name>' could not be found, but is referenced in

hardware configuration!"

Eventually the device file required by the Profibus configuration is not in the correct

directory. . Check the directory setting for configuration files in ‚Project' 'Options'

'Directories'.

3456

"The profibus device '<name>' couldn't be created!"

The device file for module <name> does not fit to the current configuration.

Eventually it has been modified since the configuration has been set up in »PLC

Designer« or it is corrupted.

3457

"Error in module description!"

Please check the device file of this module.

3458

"The PLC-Configuration couldn't be created! Check the configuration files."

Check if all required configuration and device files are available in the correct path

(see defined compile directory in 'Project' 'Options' /Directories)

1 2 ... 584 585 586 587 588 589 590 591 592 593 594 ... 843 844

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze PLC Designer PLC Designer (R2-x) Bedienungsanleitung Seite 589

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze PLC Designer PLC Designer (R2-x)