Lenze E94AYCEO Bedienungsanleitung PDF herunterladen (Seite 134)

Lenze · E94AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 12/2013 · TD17 134

14 Implemented CIP™ objects

14.2 EtherNet/IP objects

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Instance attribute "Configuration Capability" (attribute 2)

6 AcdStatus Display of the status of address conflict detection (ACD):

• 0: No address conflict detected

• 1: Address conflict detected

7 ... 31 - Reserved (0)

Bits Name Description

0 BOOTP Client The state ’1’ indicates that BOOTP is used for the TCP/IP configuration of

the device.

1 DNS Client Is not supported (state ’0’).

2 DHCP Client The state ’1’ indicates that DHCP is used for the TCP/IP configuration of

the device.

3 DHCP-DNS Update Is not supported (state ’0’).

4 Configuration Settable The state ’1’ indicates that the TCP/IP configuration can be set in

attribute 5 (Interface Configuration).

5 Hardware Configurable Is not supported (state ’0’).

6 Interface Configuration

Change Requires Reset

The state ’1’ indicates that changes of the TCP/IP configuration in

attribute 5 (Interface Configuration) will only take effect after a reset of

the device ("power off/on" or "type 0 reset").

The state ’0’ is not supported (changes becoming effective immediately).

7 AcdCapable The state ’1’ indicates that the device is provided with address conflict

detection (ACD).

8 ... 31 - Reserved (0)

Bits Name Description

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 148 149

Keine Kommentare

Lenze E94AYCEO Bedienungsanleitung Seite 134