Lenze E94AYCEO Bedienungsanleitung PDF herunterladen (Seite 57)

8 I/O data transfer (implicit messages)

8.2 I/O configuration in the »Engineer«

Lenze · E94AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 12/2013 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

In the following example, ...

• the ports "LPortControl1" and "Lport32In1" (a total of 6 bytes) have been mapped into

the receive PDO PDO_RX0;

• the ports "LPortStatus1" and "LPort32Out1" (a total of 6 bytes) have been mapped into

the transmit PDO PDO_TX0.

5. Then link the mapped ports to application signals in the technology application selected.

• Activate the »FB-Editor« via the multiplexer codes (from code C03000) if this has not

been done yet.

• If the »FB Editor« is activated, the multiplexer codes are no longer available. In this case,

you must carry out the interconnection directly in the »FB Editor«.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 148 149

Keine Kommentare

Lenze E94AYCEO Bedienungsanleitung Seite 57