Lenze E94AYCEO Bedienungsanleitung PDF herunterladen (Seite 43)

6 Commissioning

6.3 Setting the IP configuration of the Servo Drive 9400

Lenze · E94AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 12/2013 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

6.3.5 Setting the multicast configuration

Several scanners ("Listen only" or "Input only" connections) can access multicast telegrams which

are sent by drives. Settings for multicast configuration have to be carried out as well in the

EtherNet/IP configuration software (z. B. »RSLogix 5000« from Rockwell).

By default, the communication module automatically generates the Multicast IP start address for I/

O data transfer. The standard TTL value for Multicast transfer is ’1’; the Multicast I/O data packages

are therefore distributed solely via the local network.

The following multicast codes are configurable:

Multicast IP Start Address

Multicast IP start addresses serve to send a message to the members of a certain group (i.e. possibly

to several nodes).

The multicast IP start address is set/changed in C13006

/ C14006.

In C13016/1...4

/ C14016/1...4 the currently used multicast IP address of the drive is shown.

 Note!

You can also explicitly set the multicast IP start address and the multicast TTL value. We

recommend, however, not to change the default settings in order to ensure a secure

multicast transmission.

Code Description

C13018

/ C14018 Selection for multicast IP addressing via the instance attribute 9 (Mcast Config) in the TCP/

IP Interface Object (245 / 0xF5) ( 132)

• Value ’0’: The default algorithm is used.

• Value ’1’: The address stored in code C13006

/ C14006 is used as multicast IP start

address.

C13019

/ C14019 Setting of the multicast TTL value for the validity time of data packets in the EtherNet/IP

network

(Instance attribute 8 (TTL Value) in the TCP/IP Interface Object (245 / 0xF5)

( 132))

C13020

/ C14020 Used to set how many multicast IP addresses will be assigned.

(Instance attribute 9 (Num Mcast) in the TCP/IP Interface Object (245 / 0xF5)

( 132))

Example: Display of the multicast IP address 239.64.2.224

Code C13016/1

C14016/1

C13016/2

C14016/2

C13016/3

C14016/3

C13016/4

C14016/4

Value 239 64 2 224

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 148 149

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze E94AYCEO Bedienungsanleitung Seite 43

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Lenze E94AYCEO