Lenze E84AYCEC Bedienungsanleitung PDF herunterladen (Seite 72)

E84AYCEC communication manual (Ethernet POWERLINK)

Parameter reference

Parameters of the communication module

72 L EDS84AYCEC EN 3.0 - 09/2012

C13066

C13067

C13071

Parameter | Name:

C13066 | 0x1F8D PResPayloadLimit RPDO CN

Data type: UNSIGNED_16

Index: 11509

= 2CF5

The code defines the reserved user data length of the PRes telegrams for controlled nodes 1 ... 100. Each subcode

number corresponds to one EPL node with the same node ID. The EPL node must be enabled via code C13028

The subcodes describe the PRes telegrams received. The value must be within the range of 36 ... 1490 bytes.

The values are upper limit values for the entire size of the PDO mappings for received PRes telegrams.

In the configured state, the values stored for the EPL nodes must be identical to the corresponding C13072

entries.

C13066 must have an identical value in all EPL nodes of the network.

Setting range (min. value | unit | max. value)

0 byte 1490

Subcodes Lenze setting Info

C13066/1 0 byte

... ...

C13066/100 0 byte

 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

Parameter | Name:

C13067 | 0x1F8D PResPayloadLimit RPDO

Data type: UNSIGNED_16

Index: 11508

= 2CF4

The code defines the reserved user data length of the PRes frames for managing node, diagnostic device or router.

Each subcode number corresponds to one EPL node with the same node ID. The EPL node must be enabled via code

C13028

The subcode describes the PRes telegrams received. The value must be within the limits of 36 ... 1490 bytes.

The values are upper limit values for the entire size of the PDO mappings for received PRes telegrams.

In the configured state, the values stored for the nodes must be identical to the corresponding C13072

entries.

C13067 must have an identical value in all EPL nodes of the network.

Setting range (min. value | unit | max. value)

0 byte 1490

Subcodes Lenze setting Info

C13067/1 0 byte Managing node

C13067/2 0 byte Diagnostics device

C13067/3 0 byte Router

 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

Parameter | Name:

C13071 | 0x1F98.4 PReqPayloadLimit RPDO

Data type: UNSIGNED_16

Index: 11504

= 2CF0

The code defines the maximum data size to be received by the controlled node via PReq for the current network

configuration. C13071 is an upper limit value for the entire size of the PDO mapping for the PReq telegram.

In the configured state, the value must be identical to the entry for a response valid for the EPL node.

Setting range (min. value | unit | max. value) Lenze setting

36 byte 1490 36 bytes

 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 88 89

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze E84AYCEC Bedienungsanleitung Seite 72

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Lenze E84AYCEC