Lenze IM94MV01C Bedienungsanleitung PDF herunterladen (Seite 10)

8 IM94MV01C

1.4.1 Connection using PPP over RS-232/RS485

1. The ﬁrst time in a session, click [Project] then [Connection Setup] or click the [ ] icon and select the proper inter-

face from the list.

2. Optionally click on the [Properties] button to change “COM Port” number and/or baud rate if necessary. Note that baud

rate assigned in MotionView must be the same as the baud rate set on the drive.

3. Select [Node] then [Connect drive] or click the [

] icon. The Connection dialog box opens as shown in Figure 8.

4. Specify the address(es) of the drive(s) you want to connect. Refer to paragraph 1.5 “Build RS-485 Connection List” for

details.

5. Click the [Connect] button.

6. Drive(s) with speciﬁed address(es) will be connected and appear on the left in the Node Tree.

Figure 9: RS-485 Build List

1.4.2 Connection using 10/100 Ethernet

1. Conﬁgure IP Address of the PC

Click [Start] (In the bottom left-hand corner of your desktop).

Figure 10a: Start

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

Keine Kommentare

Lenze IM94MV01C Bedienungsanleitung Seite 10