Lenze TCF Series Bedienungsanleitung PDF herunterladen (Seite 6)

INSTALLATION

Ensure proper handling and avoid excessive mechanical stress. Do not bend any components

and do not change any insulation distances during transport, handling, installation or

maintenance. Do not touch any electronic components or contacts. This drive contains

electrostatically sensitive components, which can easily be damaged by inappropriate

handling. Static control precautions must be adhered to during installation, testing, servicing

and repairing of this drive and associated options. Component damage may result if proper

procedures are not followed.

This drive has been tested by Underwriters Laboratory (UL) and is an approved component

in compliance with UL508 Safety Standard.

Warnings!

• Suitable for use on a circuit as described in Section 7.0 of this manual.

• Use minimum 75 °C copper wire only.

• Shall be installed in a pollution degree 2 macro-environment.

This drive must be installed and conﬁgured in accordance with both national and international

standards. Local codes and regulations take precedence over recommendations provided in

this and other Lenze AC Tech documentation.

The TCF drive is considered a component for integration into a machine or process. It is neither

a machine nor a device ready for use in accordance with European directives (reference

machinery directive and electromagnetic compatibility directive). It is the responsibility of the

end user to ensure that the machine meets the applicable standards.

ELECTRICAL CONNECTION

When working on live drive controllers, applicable national safety regulations must be observed.

The electrical installation must be carried out according to the appropriate regulations (e.g.

cable cross-sections, fuses, protective earth [PE] connection). While this document does make

recommendations in regards to these items, national and local codes must be adhered to.

The documentation contains information about installation in compliance with EMC (shielding,

grounding, ﬁlters and cables). These notes must also be observed for CE-marked controllers.

The manufacturer of the system or machine is responsible for compliance with the required

limit values demanded by EMC legislation.

APPLICATION

The drive must not be used as a safety device for machines where there is a risk of personal injury

or material damage. Emergency Stops, over-speed protection, acceleration and deceleration

limits, etc must be made by other devices to ensure operation under all conditions.

The drive does feature many protection devices which are aimed at protecting the drive

and the driven equipment by generating a fault and shutting the drive and motor down by

removing power. Mains power variances can also result in shutdown of the drive. When the

fault condition disappears or is cleared, the drive can be conﬁgured to automatically restart,

it is the responsibility of the user and/or OEM and/or integrator to ensure that the drive is

conﬁgured for safe operation.

1.6 CUSTOMER MODIFICATION

Lenze AC Tech, its sales representatives and distributors, welcome the opportunity to assist

our customers in applying our products. Many customizing options are available to aid in this

function. Lenze AC Tech cannot assume responsibility for any modiﬁcations not authorized

by its engineering department.

1 2 3 4 5 6 7 8 9 10 11 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze TCF Series Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Lenze TCF Series