Lenze 2130IB Bedienungsanleitung PDF herunterladen (Seite 22)

3.2.3. Additional procedure for FMS / mixed operation

When using the FMS / mixed operation, some parameters must be set

for the controller and the field bus module, which is only possible by

means of the LECOM1 interface.

For the parameter setting of the controllers using the LEMOC2

program, connect the PC (RS232) and the controller (LECOM1; X6) by

means of a PC system cable.

Name Part no. Explanation

PC system cable 5 m 338 094 System cable 5m between PC (9-pole

socket) and controller

PC system cable 10 m 338 095 System cable 10m between PC (9-pole

socket) and controller

Cable type

Cable resistance

Capacitance per unit length

Length

−

LIYCY 4 x 0.25mm

screened

< 100 Ω/km

< 140nF/km

≤ 15m

Wiring of the system cable

Controller

9-pole SubD socket

Pin no.

PC or similar

9-pole socket

Pin no.

PC or similar

25-pole socket

Pin no.

2 (RxD) 3 (TxD) 2 (TxD)

3 (TxD) 2 (RxD) 3 (RxD)

5 (GND) 5 (GND) 7 (GND)

Only use metallized SubD housings. Connect the screen to the

housings at both ends.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 91 92

Keine Kommentare

Lenze 2130IB Bedienungsanleitung Seite 22