Lenze EVS9332xS Bedienungsanleitung PDF herunterladen (Seite 34)

Configuration

Basic configurations

2.2.4 Master frequency coupling

2−22

EDSVS9332S−EXT EN 2.0

Features

The features describe the basic properties of this configuration. Some of them, however, can only

be used by reprogramming.

l Resolver feedback is possible only

l Evaluation of the setpoint (cascading factor) is possible with a factor (numerator/denominator)

for the master frequency output (and thus for all following drives)

l Other evaluation of the setpoint is possible with a factor (numerator/denominator) for the

corresponding slave (gearbox adaptation). Can be set via an analog signal source (standard:

code C0032, C0033)

l External torque limitation is possible

l The QSP or CINH function in the individual drive do not influence the setpoint for the cascade.

l Possible interventions for phase trimming and speed correction via

– LECOM,

– analog terminal or

– one of the signal sources (function blocks).

l Message "following error limit reached" can be set via code

l TRIP when reaching the phase controller limit

l Speed limit of slave 0 = C0011

l Phase controller influence can be set and switched off via the digital input

l Homing function is possible via zero track or touch probe

l Synchronising to a setpoint is possible via zero track or touch probe

l Synchronising characteristic can be set via ramp−function generator

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 263 264

Keine Kommentare

Lenze EVS9332xS Bedienungsanleitung Seite 34