Lenze IM94MV01C Bedienungsanleitung PDF herunterladen (Seite 14)

12 IM94MV01C

1.5 Build RS-485 Connection List

Figure 11: Build RS 485 Connection List

Now This window shows a list of drives currently connected.

To be This window shows a list of available drives that could be connected

Cancel Dismiss dialog box without any action.

Help Access contents of MotionView Help folder

Scan Find and connect all drives on the network. A search is performed for all drives in address range 0-31.

Add Add address to the connection list.

Remove Removes highlighted address from the connection list.

Connect One Speciﬁes one drive’s address to be connected

Connect Puts the drive selected in the “To be” window into the “Now” window.

1.6 Build Ethernet Connection List

Figure 12: Build Ethernet Connection List

IP address Specify a single device address in this ﬁeld and then click [Connect] to this drive with this IP address.

Connected Shows drives currently connected

To be connected Shows drives MotionView found on the network and available for connection

- -> X Removes highlighted addresses from the “To Be Connected” list

Discover Locates every physically connected drive on the network

Connect Connects every drive with an IP listed in the “To Be Connected” list box.

Cancel Dismisses dialog box without any action.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Keine Kommentare

Lenze IM94MV01C Bedienungsanleitung Seite 14