Lenze DDS v2.3 Bedienungsanleitung PDF herunterladen (Seite 117)

Drive PLC Developer Studio

Working with projects and objects

6-39

DDS EN 2.3

Note!

The Lenze default setting for DDS and automation system is a baud rate of 500 KBaud.

Creating a channel with default parameters

Select

Communication parameters

and click localhostà

àà

àLenze standard and then OK.

Creating a communication channel with the Lenze CAN driver

1. Click New to configure a new localhost channel.

2. Select

Communication parameters: New channel

and click CAN 8220:

3. Click OK.

4. Select the new channel and enter the defined /required parameters in Communication

parameters by clicking the relevant entry and select the parameters using the arrow keys.

5. Accept the settings with OK.

(This parameterizes and starts the communication driver GATEWAY.EXE.)

Creating a communication channel with the OPC system bus driver

1. Click New to configure a new channel.

2. Select

Communication parameters: New channel

, list field Device and click Systembus

Server Driver.

3. Click OK.

4. Use the entry Hardware Number to select a specific port. If 0 is entered, the standard port

will be used.

Use the communication tool System bus configurator to determine:

– how many active ports are available

– the individual port numbers

– the standard port

Show/Hide Bookmarks

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 339 340

Keine Kommentare

Lenze DDS v2.3 Bedienungsanleitung Seite 117