Lenze 8400 Bedienungsanleitung PDF herunterladen (Seite 118)

Mechanical installation

Standard devices in t he power range 3 ... 22 kW

Filter mounting in ”standard” technique



118

EDS84ASC552 EN 9.1

E84ZESR020

Fig. 5-23 Assembly with footprint filter

Proceed as follows for installation:

1. Prepare M5 threaded holes on the mounting plate and equip them with screws and

washers.

– Use four M5 screw and washer assemblies or M5 hexagon socket screws with

washers.

– Do not yet tighten the screws.

2. Mount the filter onto the prepared mounting plate.

– Only tighten the screws hand-tight.

3. Loosen the two screw and washer assemblies to fix the standard device on the filter.

–TwoM5×14mmscrewandwasherassemblies.

4. Mount the standard device onto the filter and tighten the screws.

– Observe the instructions in the documentation for the standard device.

– Tightening torque: 3.4 Nm (30 lb-in)

5. If necessary, preassemble additional units.

6. Align all units.

7. Screw all units onto the mounting plate.

– Tightening torque: 3.4 Nm (30 lb-in)

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 303 304

Keine Kommentare

Lenze 8400 Bedienungsanleitung Seite 118