Lenze 8400 Bedienungsanleitung PDF herunterladen (Seite 97)

Mechanical installation

Standard devices in a power range of 0.25 ... 3 kW

Filter mounting variant



EDS84ASC552 EN 9.1

E84ZESR008

Fig. 5-6 Assembly with side-mounted filter

Proceed as follows for installation:

1. Prepare M5 threaded holes on the mounting plate and equip them with screws and

washers.

– Two M5 screw and washer assemblies or M5 hexagon socket screws with washers

for the filter.

– Two M5 screw and washer assemblies or M5 hexagon socket screws with washers

for the standard device.

– Do not yet tighten the screws.

2. Remove the screw and washer assemblies from the filter to fix the standard device.

3. Mount the filter onto the prepared mounting plate.

– Only tighten the screws hand-tight.

4. Mount the standard device onto the prepared mounting plate.

– Observe the instructions in the documentation for the standard device.

– Only tighten the screws hand-tight.

5. If necessary, preassemble additional units.

6. Align all units.

7. Screw all units onto the mounting plate.

– Tightening torque: 3.4 Nm (30 lb-in)

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 303 304

Keine Kommentare

Lenze 8400 Bedienungsanleitung Seite 97