Lenze E94AxHE Technology Application Synchronism Bedienungsanleitung PDF herunterladen (Seite 48)

9400 Technology applications | Synchronism with mark synchronisation

Parameter setting & configuration

Brake control

48 L EDS94TA10040xxxx EN 1.1 - 10/2008

4.11 Brake control

[4-16] Basic function "Brake control" (schematic diagram)

r Parameter setting: Tab Application parameters  dialog level Overview  Brake control

The basic function "Brake control" serves to the wear free

control and monitoring of a holding brake.

In the simplest case, an optionally available brake module

is used.

Alternatively the holding brake can also be controlled and

monitored via the digital inputs/outputs.

LS_Brake

 Note!

In the Lenze setting the brake control is switched off to reach a safe status after

mains connection.

Parameter Lenze setting

Value Unit

C02580 Operating mode of brake Brake control off

C02581 Brake activation threshold 50 rpm

C02582 Brake resp. to pulse inhibit Activate the brake immediately

C02583 Status input monitoring Not active

C02585 Brake control polarity Not inverted

C02586 Starting torque 1 0.00 Nm

C02587 Starting torque 2 0.00 Nm

C02588 Starting torque source Starting torque 1/2

C02589 Brake closing time 100 ms

C02590 Brake opening time 100 ms

C02591 Waiting time - status monitoring 100 ms

C02593 Waiting time - brake activation 0.000 s

C02594 Test torque 0.00 Nm

C02595 Permissible angle of rotation 5 °

C02596 Grinding speed 100 rpm

C02597 Accel./decel. time - grinding 1.000 s

C02598 Grinding ON time 0.5 s

C02599 Grinding OFF time 0.5 s

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 79 80

Keine Kommentare

Lenze E94AxHE Technology Application Synchronism Bedienungsanleitung Seite 48